NAFLON™ PTFE/PFA/FEP TUBE

TOMBO™ No. 9003-PTFE/PFA/FEP

NAFLON tubes are pure fluororesin tubes that do not include additional agents such as fillers and plasticizers. PTFE, PFA, and FEP all have excellent chemical resistance, heat resistance, and weather resistance.

NAFLON™ BT TUBE

TOMBO™ No. 9003-BT

NAFLON BT Tube is a type of PTFE tube. It has better flexibility and transparency than other PTFE tubes. As it bends easily and is not susceptible to buckling, it is suitable for pipes installed in tight spaces.

NAFLON™ PFA HG TUBE

TOMBO™ No. 9003-PFA-HG

The NAFLON PFA-HG Tube is a PFA tube that uses New PFA material with little fluorine ion elusion and achieves a smooth inner tube surface by controlling the higher-order structure of PFA (grain refinement of spherulites). It is best suited to applications in semiconductor and liquid crystal industrial fields that require improved cleanliness.

NAFLON™ PFA AS TUBE

TOMBO™ No. 9003-PFA-AS

The NAFLON PFA-AS (Anti-Static) Tube is a PFA-HG tube that has a striped conductive PFA part on the inside and outer layer.
It is a tube where the fluid inside is visible and it can prevent tube insulation breakdown due to transferring the likes of organic solvents, fuels, refrigerants, powders, and steams.

NAFLON™ PFA NE TUBE

TOMBO™ No. 9003-NE

The NAFLON PFA-NE (PFA: Tetrafluoroethylene Perfluoroalkoxy Ethylene Copolymer, NE: Non-Explosion) Tube is a tube in which the outer surface of Nichias’ PFA-HG (inner surface of smooth New PFA) Tube has a striped, conductive PFA part.
Due to the isolation benefits of the conductive PFA part, it is best suited to preventing fire accidents caused by the discharge of sparks from a combustible gas atmosphere onto the outer surface of the tube.
*Winner of the Plunkett Award
Plunkett Award: An award established in 1988 to mark the 50th anniversary of the discovery of fluororesin Teflon™ by Doctor Plunkett, a scientist of DuPont™.

NAFLON™ RPL TUBE

TOMBO™ No. 9003-RPL

NAFLON RPL Tube is a tube made by adding helix-shaped grooves to NAFLON PTFE Tube. It has outstanding flexibility, a small bending radius, low friction, and excellent non-adhesiveness. It is a tube with little fluid pressure loss and for which fluid is not susceptible to adhering to the inner tube walls.

NAFLON™ HOSE

TOMBO™ No. 9065/9066/9067/9068

NAFLON HOSE contains an inner hose made from an excellent heat- and chemical-resistant fluoropolymer. These products can be further modified to meet the requirements of particular applications by reinforcing the outside of the tube with protective stainless steel wire braiding or fitting with designated metal or flared connections. For its main applications, it is best suited as a pipe joint for steam, oil (particularly non-flammable oils), various gases, chemical solutions, and foodstuff.