PFA tube for chemical transportation
TOMBO™ No. 9003-PFA-HG
NAFLON™ PFA HG TUBE
The NAFLON PFA-HG Tube is a PFA tube that uses New PFA material with little fluorine ion elusion and achieves a smooth inner tube surface by controlling the higher-order structure of PFA (grain refinement of spherulites). It is best suited to applications in semiconductor and liquid crystal industrial fields that require improved cleanliness.
Product Category
Fluororesin ProductsTubes, Hoses, Bellows
Industry
Chemistry & PetrochemistryChemistryElectronicsSemiconductors & Flat Panel Displays (FPD)
Forte
It has a smooth inner tube surface (Rt = 0.2μm*).
Reduced particle and chemical solution residue
Reduced cleaning up (cleaning time)
Reduced chemical solution ingress due to a smaller inner surface volume of the tube
Increased transparency
Increased dielectric strength
*These values are our actual measurement values. They are not standard values.
It uses a new-PFA raw material.
Reduced fluorine ion elution
Improved stress crack resistance in stress environments
(e.g. piranha solution, oleum)
Production specifications
| Nominal dimensions (mm) | Outside diameter (mm) | Thickness (mm) | Length (m) | |||
|---|---|---|---|---|---|---|
| Inside diameter x Outside diameter | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance |
| 2×4 | 4.0 | ±0.10 | 1.0 | ±0.06 | 10,50 | +1% -0% |
| 3×4 | 4.0 | 0.5 | ±0.05 | |||
| 4×6 | 6.0 | 1.0 | ±0.06 | |||
| 6×8 | 8.0 | ±0.12 | 1.0 | ±0.06 | ||
| 8×10 | 10.0 | 1.0 | ±0.06 | |||
| 10×12 | 12.0 | 1.0 | ±0.06 | |||
| 16×19 | 19.0 | 1.5 | ±0.10 | |||
| 22×25 | 25.0 | ±0.15 | 1.5 | ±0.10 | ||
The burst pressure at room temperature and the minimum bending radius are the same as the NAFLON PFA Tube.
Size in inches
| Nominal dimensions (mm) | Outside diameter (mm) | Thickness (mm) | Length (m) | |||
|---|---|---|---|---|---|---|
| Inside diameter x Outside diameter | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance |
| 2.17×3.17 | 3.17 | ±0.10 | 0.50 | ±0.05 | 10、50 | +1% -0% |
| 3.96×6.35 | 6.35 | 1.20 | ±0.10 | |||
| 4.35×6.35 | 6.35 | 1.00 | ±0.06 | |||
| 6.35×9.52 | 9.52 | ±0.12 | 1.59 | ±0.10 | ||
| 7.52×9.52 | 9.52 | 1.00 | ±0.06 | |||
| 9.52×12.70 | 12.70 | 1.59 | ±0.10 | |||
| 15.88×19.05 | 19.05 | 1.59 | ±0.10 | |||
| 22.22×25.40 | 25.40 | ±0.15 | 1.59 | ±0.10 | ||
The burst pressure at room temperature and the minimum bending radius are the same as the NAFLON PFA Tube.
Other
- TOMBO is a registered trademark or trademark of NICHIAS Corporation.
- Name of products with "®" are registered trademarks of NICHIAS Corporation.
- Name of products with "™" are trademarks of NICHIAS Corporation.
SDS（製品安全データシート）
