Flexible tube
TOMBO™ No. 9003-RPL
NAFLON™ RPL TUBE
NAFLON RPL Tube is a tube made by adding helix-shaped grooves to NAFLON PTFE Tube. It has outstanding flexibility, a small bending radius, low friction, and excellent non-adhesiveness. It is a tube with little fluid pressure loss and for which fluid is not susceptible to adhering to the inner tube walls.
Product Category
Fluororesin ProductsTubes, Hoses, Bellows
Industry
Chemistry & PetrochemistryChemistryElectronicsSemiconductors & Flat Panel Displays (FPD)
Forte
Type
Inside diameter standard tube (I) (A type only)
Use this when joining a pipe and so on to the inside of the tube. You can join either glass, metallic, or resin pipes.
Outside diameter standard tube (O) (A, B, C types)
Use this when using a tube joint, etc. For the shape of the tip, we offer three types of structure to suit your application.
A type
Straight at both ends
B type
With a reinforced sleeve at both ends
C type
Straight and welded at both ends
Quality characteristics
| Nominal diameter | Inside diameter of edge (mm) | Helix outside diameter (mm) | Burst pressure at room temperature (MPa) | Minimum bending radius (mm) | Maximum manufacturing length (m) |
|---|---|---|---|---|---|
| 6A | 6 | 8.5 | 1.8 | 6.0 | 3.0 |
| 8A | 8 | 10.5 | 1.4 | 7.0 | 3.0 |
| 10A | 10 | 13.0 | 1.0 | 10.0 | 3.0 |
| 12A | 12 | 16.0 | 0.9 | 15.0 | 3.0 |
| 15 A Note 1 | 16 | 17.5 | 0.8 | 25.0 | 3.0 |
| 1/4B | 6.4 | 8.5 | 1.8 | 6.0 | 3.0 |
| 3/8B | 9.5 | 13.0 | 1.0 | 10.0 | 3.0 |
| 1/2B | 12.7 | 16.0 | 0.9 | 15.0 | 3.0 |
Outside diameter of standard tube (O)
| Nominal diameter | Outside diameter of edge (mm) | Helix outside diameter (mm) | Burst pressure at room temperature (MPa) | Minimum bending radius (mm) | Maximum manufacturing length (m) | |||
|---|---|---|---|---|---|---|---|---|
| A and B types | C type | A and B types | C type | A and B types | C type | |||
| 6A | 6 | 8.5 | 1.8 | 6.0 | 3.0 | |||
| 8A | 8 | 9.5 | 10.5 | 1.6 | 1.4 | 7.0 | 3.0 | |
| 10A | 10 | 12.0 | 13.0 | 1.3 | 1.0 | 9.0 | 10.0 | 3.0 |
| 12A | 12 | 14.5 | 16.0 | 1.0 | 0.9 | 10.0 | 15.0 | 3.0 |
| 1/4B | 6.4 | 8.5 | 1.8 | 6.0 | 3.0 | |||
| 3/8B | 9.5 | 12.0 | 13.0 | 1.3 | 1.0 | 9.0 | 10.0 | 3.0 |
| 1/2B | 12.7 | 14.5 | 16.0 | 1.0 | 0.9 | 10.0 | 15.0 | 3.0 |
Note 1: For 15 A, the A-type edge shape is standard. Please contact us if you have any questions about other types.
*The dimensions of the inner diameter standard tube are those of the A-type. If you have any questions about models that are 3 meters or more in length, please contact us.
*The burst pressure and minimum bending radius at room temperature are actual measured values and are not standard values.
*For use in applications that experience repeated expansion or bending, please contact us.
Other
- TOMBO is a registered trademark or trademark of NICHIAS Corporation.
- Name of products with "®" are registered trademarks of NICHIAS Corporation.
- Name of products with "™" are trademarks of NICHIAS Corporation.
Download Catalogs
SDS（製品安全データシート）PFA tube for chemical transportation
NAFLON™ PFA HG TUBE
TOMBO™ No. 9003-PFA-HGAnti-static PFA tube for chemical transportation
NAFLON™ PFA NE TUBE
TOMBO™ No. 9003-NEPFA tube with anti-static inner and outer surfaces
NAFLON™ PFA AS TUBE
TOMBO™ No. 9003-PFA-ASPTFE sink
