PFA tube with anti-static inner and outer surfaces
TOMBO™ No. 9003-PFA-AS
NAFLON™ PFA AS TUBE
The NAFLON PFA-AS (Anti-Static) Tube is a PFA-HG tube that has a striped conductive PFA part on the inside and outer layer.
It is a tube where the fluid inside is visible and it can prevent tube insulation breakdown due to transferring the likes of organic solvents, fuels, refrigerants, powders, and steams.
Product Category
Fluororesin ProductsTubes, Hoses, Bellows
Industry
Chemistry & PetrochemistryChemistryElectronicsSemiconductors & Flat Panel Displays (FPD)
Forte
It has an antistatic feature and can prevent the dielectric breakdown of the tube due to triboelectrification with fluids.
The fluid inside is visible.
Quality characteristics
| Nominal dimensions (mm) | Outside diameter (mm) | Thickness (mm) | Length (m) | |||
|---|---|---|---|---|---|---|
| Inside diameter x Outside diameter | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance |
| 4×6 | 6.0 | +0.15 -0.10 |
1.0 | ±0.10 | 10, 50, 100 |
+1% -0 |
| 6×8 | 8.0 | 1.0 | ||||
| 8×10 | 10.0 | 1.0 | ||||
| 10×12 | 12.0 | +0.25 -0.10 |
1.0 | |||
| 16×19 | 19.0 | 1.5 | ±0.15 | |||
| 22×25 | 25.0 | 1.5 | ||||
| Nominal dimensions (mm) | Internal circumference | Outer circumference | The thick part | Number of stripes | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Inside diameter x Outside diameter | Thickness (mm) | Width (mm) | Thickness (mm) | Width (mm) | Width (mm) | ||||||
| Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance | ||
| 4×6 | 0.02 | +0.18 -0.015 |
1.4 | ±0.5 | 0.02 | +0.18 -0.015 |
2.1 | ±0.5 | 0.02 | +0.18 -0.015 |
4 |
| 6×8 | 2.1 | ±0.7 | 2.8 | ±0.9 | |||||||
| 8×10 | 2.8 | ±0.9 | 3.5 | ±1.1 | |||||||
| 10×12 | 1.3 | ±0.6 | 2.2 | ±0.8 | 8 | ||||||
| 16×19 | 2.0 | ±0.8 | 3.2 | ±1.0 | |||||||
| 22×25 | 2.7 | ±1.0 | 4.4 | ±1.4 | |||||||
| Nominal dimensions (mm) | Outside diameter (mm) | Thickness (mm) | Length (m) | |||
|---|---|---|---|---|---|---|
| Inside diameter x Outside diameter | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance |
| 3.96×6.35 | 6.35 | +0.15 -0.10 |
1.20 | ±0.12 | 10, 50, 100 |
+1% -0 |
| 4.35×6.35 | 6.35 | 1.00 | ±0.10 | |||
| 6.35×9.52 | 9.52 | 1.59 | ±0.15 | |||
| 7.52×9.52 | 9.52 | 1.00 | ±0.10 | |||
| 9.52×12.70 | 12.70 | +0.25 -0.10 |
1.59 | ±0.15 | ||
| 15.88×19.05 | 19.05 | 1.59 | ||||
| 22.22×25.40 | 25.40 | 1.59 | ||||
| Nominal dimensions (mm) | Internal circumference | Outer circumference | The thick part | Number of stripes | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Inside diameter x Outside diameter | Thickness (mm) | Width (mm) | Thickness (mm) | Width (mm) | Width (mm) | ||||||
| Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance | Standard dimensions | Tolerance | ||
| 3.96×6.35 | 0.02 | +0.18 -0.015 |
1.6 | ±0.5 | 0.02 | +0.18 -0.015 |
2.3 | ±0.5 | 0.02 | +0.18 -0.015 |
4 |
| 4.35×6.35 | |||||||||||
| 6.35×9.52 | 2.2 | ±0.7 | 3.4 | ±0.9 | |||||||
| 7.52×9.52 | |||||||||||
| 9.52×12.70 | 1.2 | ±0.6 | 2.3 | ±0.8 | 8 | ||||||
| 15.88×19.05 | 2.0 | ±0.8 | 3.2 | ±1.0 | |||||||
| 22.22×25.40 | 2.6 | ±1.0 | 4.3 | ±1.4 | |||||||
*Please confirm the delivery date (availability of stock).
*If you would like to request other sizes, please contact us.
Other
- TOMBO is a registered trademark or trademark of NICHIAS Corporation.
- Name of products with "®" are registered trademarks of NICHIAS Corporation.
- Name of products with "™" are trademarks of NICHIAS Corporation.
SDS（製品安全データシート）
