PFA tube with anti-static inner and outer surfaces
![](/cms/nichias/img/products/item/fluorine/tube-hoses-bellows/l_thumbnail_tube05.jpg)
NAFLON™ PFA AS TUBE
TOMBO™ No. 9003-PFA-AS
The NAFLON PFA-AS (Anti-Static) Tube is a PFA-HG tube that has a striped conductive PFA part on the inside and outer layer.
It is a tube where the fluid inside is visible and it can prevent tube insulation breakdown due to transferring the likes of organic solvents, fuels, refrigerants, powders, and steams.
Anti-static PFA tube for chemical transportation
![](/cms/nichias/img/products/item/fluorine/tube-hoses-bellows/l_thumbnail_tube03.jpg)
NAFLON™ PFA NE TUBE
TOMBO™ No. 9003-NE
The NAFLON PFA-NE (PFA: Tetrafluoroethylene Perfluoroalkoxy Ethylene Copolymer, NE: Non-Explosion) Tube is a tube in which the outer surface of Nichias’ PFA-HG (inner surface of smooth New PFA) Tube has a striped, conductive PFA part.
Due to the isolation benefits of the conductive PFA part, it is best suited to preventing fire accidents caused by the discharge of sparks from a combustible gas atmosphere onto the outer surface of the tube.
*Winner of the Plunkett Award
Plunkett Award: An award established in 1988 to mark the 50th anniversary of the discovery of fluororesin Teflon™ by Doctor Plunkett, a scientist of DuPont™.
Flexible tube
![](/cms/nichias/img/products/item/fluorine/tube-hoses-bellows/l_thumbnail_tube10.jpg)
NAFLON™ RPL TUBE
TOMBO™ No. 9003-RPL
NAFLON RPL Tube is a tube made by adding helix-shaped grooves to NAFLON PTFE Tube. It has outstanding flexibility, a small bending radius, low friction, and excellent non-adhesiveness. It is a tube with little fluid pressure loss and for which fluid is not susceptible to adhering to the inner tube walls.
Fluoropolymer machined product
![](/cms/nichias/img/products/item/fluorine/processed_products/l_thumbnail_processed03.jpg)
PTFE MACHINED PRODUCT
TOMBO™ No. 9020
PTFE MACHINED PRODUCT is a product that is made by cutting fluororesin material and machining it into shapes to suit various applications.
Fluoropolymer injection molded product
![](/cms/nichias/img/products/item/fluorine/processed_products/l_thumbnail_processed02.jpg)
PFA INJECTION MOLD PRODUCT
TOMBO™ No. 9021
PFA INJECTION MOLD PRODUCT is an injection molded product made of fluororesins (PFA, ETFE, PVDF) using advanced technology and excellent quality control.
It is suitable for cost reduction through the mass production of pumps, valve parts, semiconductor and FPD manufacturing equipment parts, and electronic components.
*For questions about various super-engineering plastics (PPS, PEEK, PEI, PES, PBI), please contact us.
PFA roto molded container
![](/cms/nichias/img/products/item/fluorine/processed_products/l_thumbnail_container02.jpg)
PFA ROTO MOLDED CONTAINER
TOMBO™ No. 9947
PFA ROTO MOLDED CONTAINER is a bottle made from pure PFA using a rotation molding method. The cap is made of PTFE and can be attached to the likes of a coupler or joint to suit your application and sealed with an O-ring.
PTFE diaphragm valve
![](/cms/nichias/img/products/item/fluorine/processed_products/l_thumbnail_seal03.jpg)
NAFLON™ DIAPHRAGM
TOMBO™ No. 9080
It is a diaphragm made by molding and firing PTFE powder.
The manufacturing dimensions are a maximum of ™930 mm.
Bent tube
![](/cms/nichias/img/products/item/fluorine/processed_products/l_thumbnail_tube11.jpg)
NAFLON™ TUBE PRODUCT
TOMBO™ No. 9055-PFA
NAFLON Bent Tube is a tube that is manufactured by way of special bending machining. In addition to resolving leakage problems from using joints, it also dramatically reduces the amount of pressure loss.
*If you have any questions about PTFE tubes, please contact us.
Chemical filter
![](/cms/nichias/img/products/item/filter/filter_products/l_thumbnail_filter01.jpg)
CHEMICAL GUARD
TOMBO™ No. 8803-HC/-HA/-HT
It is a filter that removes low-concentration gas (ammonia and acidic and organic gases), making it suitable for the likes of clean rooms and semiconductor manufacturing equipment. By applying Nichias’ exclusive honeycomb manufacturing technologies and having a large amount of adsorbent/functional material inside the wall, it can remove ultra-low-concentration (a few μg/m3) gas components with high efficiency.
PTFE sink
![](/cms/nichias/img/products/item/fluorine/processed_products/l_thumbnail_container01.jpg)
NAFLON™ PTFE SINK
TOMBO™ No. 9500-M/-H
There are two types of NAFLON PTFE SINK: a seamless “one-piece molded square sink (TOMBO No.9500-M)” manufactured by hydraulic forming and a “welded type square sink (TOMBO No.9500-H)” that is made by welding an 8 to 25 mm sheet. Both can be manufactured with optional drainage slopes and drain holes on the bottom. The welded type, in particular, can be manufactured into shapes to suit your application without any need for a mold.
Fluoropolymer machined product
![](/cms/nichias/img/products/item/auto_parts/retaining_parts/l_thumbnail_naflon01.jpg)
PTFE MACHINED PRODUCT
TOMBO™ No. 9020
It is made of PTFE, which boasts excellent heat resistance and a low friction coefficient, and is cut into shapes to suit all kinds of applications.