NAFLON™ RPL TUBE

TOMBO™ No. 9003-RPL

NAFLON RPL Tube is a tube made by adding helix-shaped grooves to NAFLON PTFE Tube. It has outstanding flexibility, a small bending radius, low friction, and excellent non-adhesiveness. It is a tube with little fluid pressure loss and for which fluid is not susceptible to adhering to the inner tube walls.

PTFE MACHINED PRODUCT

TOMBO™ No. 9020

PTFE MACHINED PRODUCT is a product that is made by cutting fluororesin material and machining it into shapes to suit various applications.

PFA INJECTION MOLD PRODUCT

TOMBO™ No. 9021

PFA INJECTION MOLD PRODUCT is an injection molded product made of fluororesins (PFA, ETFE, PVDF) using advanced technology and excellent quality control.
It is suitable for cost reduction through the mass production of pumps, valve parts, semiconductor and FPD manufacturing equipment parts, and electronic components.
*For questions about various super-engineering plastics (PPS, PEEK, PEI, PES, PBI), please contact us.

PTFE BACK-UP RING

TOMBO™ No. 9026

A ring offered in endless, bias cut, and spiral forms that are made by machining PTFE with a lathe. Nichias also has backup rings with filler material.

PTFE BALL VALVE SHEET

TOMBO™ No. 9029

A ball valve seat that is made by machining PTFE and filler-filled PTFE with a lathe.

PFA ROTO MOLDED CONTAINER

TOMBO™ No. 9947

PFA ROTO MOLDED CONTAINER is a bottle made from pure PFA using a rotation molding method. The cap is made of PTFE and can be attached to the likes of a coupler or joint to suit your application and sealed with an O-ring.

EXCELIDE™

TOMBO™ No. 9550

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.

EXCELIDE™ CURTAIN WALL

TOMBO™ No. 9551

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.

NAFLON™ DIAPHRAGM

TOMBO™ No. 9080

It is a diaphragm made by molding and firing PTFE powder.
The manufacturing dimensions are a maximum of ™930 mm.

NAFLON™ TUBE PRODUCT

TOMBO™ No. 9055-PFA

NAFLON Bent Tube is a tube that is manufactured by way of special bending machining. In addition to resolving leakage problems from using joints, it also dramatically reduces the amount of pressure loss.
*If you have any questions about PTFE tubes, please contact us.

NAFLON™ PTFE BELLOWS

TOMBO™ No. 9061-S/9061-HW/9061-GY/9062-S/9062-L/9063-S, L

Mainly for absorbing the thermal expansion and contraction of piping, it is an all-around expansion joint that uses fluororesin, which boasts many excellent attributes such as chemical resistance and heat resistance.
Please contact us if you have any questions regarding using or choosing a product.

NAFLON™ HOSE

TOMBO™ No. 9065/9066/9067/9068

NAFLON HOSE contains an inner hose made from an excellent heat- and chemical-resistant fluoropolymer. These products can be further modified to meet the requirements of particular applications by reinforcing the outside of the tube with protective stainless steel wire braiding or fitting with designated metal or flared connections. For its main applications, it is best suited as a pipe joint for steam, oil (particularly non-flammable oils), various gases, chemical solutions, and foodstuff.