TOMBO No.9061-S
TOMBO No.9061-HW
TOMBO No.9061-GY
TOMBO No.9062-S
TOMBO No.9062-L
TOMBO No.9063-S, L
Fluoropolymer universal expansion joint
TOMBO™ No. 9061-S/9061-HW/9061-GY/9062-S/9062-L/9063-S, L
NAFLON™ PTFE BELLOWS
Mainly for absorbing the thermal expansion and contraction of piping, it is an all-around expansion joint that uses fluororesin, which boasts many excellent attributes such as chemical resistance and heat resistance.
Please contact us if you have any questions regarding using or choosing a product.
Product Category
Fluororesin ProductsCorrosion-Resistant Linings
Industry
Chemistry & PetrochemistryOil Refining & PetrochemistryVarious Plant FacilitiesPiping
Specification
TOMBO No.9061-S
TOMBO No.9061-HW
TOMBO No.9061-GY
TOMBO No.9062-S
TOMBO No.9062-L
TOMBO No.9063-S, L
Product type and selection guidelines
| TOMBO No. | Product name | Product Structure | Maximum Working Temperature (°C) | Property Comparison | |||
|---|---|---|---|---|---|---|---|
| Heat resistance | Pressure resistance | Softness | Displacement | ||||
| 9061-S | NAFLON PTFE Bellows Joint | A bellows joint for which a PTFE tube is molded into U-shaped threads and a flange is mounted on both ends. Suitable for applications that require displacement. | 150 | ○ | ○ | ○ | ◎ |
| 9061-GY | NAFLON PTFE Bellows Joint (Reinforced ring FRR type) |
A bellows joint for which the reinforced ring material of the 9061-S model has been changed from SUS to FRP. This product is suitable for use with fluids such as chlorine and hydrochloric acid, as a measure against the SUS reinforced ring corroding. | 150 | ○ | ○ | ○ | ◎ |
| 9061-HW | NAFLON PTFE Thick Bellows Joint | A bellows joint for which the bellows part of the 9061-S model has been made thicker and the pressure resistance improved. This product can be used for vacuums without using a vacuum support ring. | 150 | ○ | ◎ | ○ | ◎ |
| 9062-S 9062-L |
NAFLON PTFE Bellows Joint (Stainless steel coating type) |
A bellows joint, for which a PTFE tube lines the inside of a thin SUS pipe, is molded into U-shaped threads and a flange is mounted on both ends. This product is suitable for applications where heat resistance and pressure resistance are required. Nichias also offers a 9062-L type for which the product length has been made longer. | 200 | ◎ | ◎ | △ | △ |
| 9063-S 9063-L |
NAFLON PTFE Bellows Joint (Heat-resistant type) |
A bellows joint for which a PTFE tube is molded into U-shaped threads and a flange is mounted on both ends. A bellows joint for which a U-shaped control ring is used and the heat resistance and pressure resistance have been improved. This product is suitable for applications where heat resistance and displacement are required. Nichias also offers a 9063-L type for which the product length has been made longer. | Three threads: 200 Five threads: 180 |
◎ | ◎ | ○ | ○ |
*The symbols ◎, ○, and △ used in the property comparison are used to compare bellows manufactured by Nichias.
*If you have any questions about using the product for vacuum resistance, please contact us.
Other
- TOMBO is a registered trademark or trademark of NICHIAS Corporation.
- Name of products with "®" are registered trademarks of NICHIAS Corporation.
- Name of products with "™" are trademarks of NICHIAS Corporation.
SDS（製品安全データシート）
