NAFLON™ PFA HG TUBE

TOMBO™ No. 9003-PFA-HG

The NAFLON PFA-HG Tube is a PFA tube that uses New PFA material with little fluorine ion elusion and achieves a smooth inner tube surface by controlling the higher-order structure of PFA (grain refinement of spherulites). It is best suited to applications in semiconductor and liquid crystal industrial fields that require improved cleanliness.

NAFLON™ PFA AS TUBE

TOMBO™ No. 9003-PFA-AS

The NAFLON PFA-AS (Anti-Static) Tube is a PFA-HG tube that has a striped conductive PFA part on the inside and outer layer.
It is a tube where the fluid inside is visible and it can prevent tube insulation breakdown due to transferring the likes of organic solvents, fuels, refrigerants, powders, and steams.

NAFLON™ PFA NE TUBE

TOMBO™ No. 9003-NE

The NAFLON PFA-NE (PFA: Tetrafluoroethylene Perfluoroalkoxy Ethylene Copolymer, NE: Non-Explosion) Tube is a tube in which the outer surface of Nichias’ PFA-HG (inner surface of smooth New PFA) Tube has a striped, conductive PFA part.
Due to the isolation benefits of the conductive PFA part, it is best suited to preventing fire accidents caused by the discharge of sparks from a combustible gas atmosphere onto the outer surface of the tube.
*Winner of the Plunkett Award
Plunkett Award: An award established in 1988 to mark the 50th anniversary of the discovery of fluororesin Teflon™ by Doctor Plunkett, a scientist of DuPont™.

NAFLON™ RPL TUBE

TOMBO™ No. 9003-RPL

NAFLON RPL Tube is a tube made by adding helix-shaped grooves to NAFLON PTFE Tube. It has outstanding flexibility, a small bending radius, low friction, and excellent non-adhesiveness. It is a tube with little fluid pressure loss and for which fluid is not susceptible to adhering to the inner tube walls.

PTFE MACHINED PRODUCT

TOMBO™ No. 9020

PTFE MACHINED PRODUCT is a product that is made by cutting fluororesin material and machining it into shapes to suit various applications.

PFA INJECTION MOLD PRODUCT

TOMBO™ No. 9021

PFA INJECTION MOLD PRODUCT is an injection molded product made of fluororesins (PFA, ETFE, PVDF) using advanced technology and excellent quality control.
It is suitable for cost reduction through the mass production of pumps, valve parts, semiconductor and FPD manufacturing equipment parts, and electronic components.
*For questions about various super-engineering plastics (PPS, PEEK, PEI, PES, PBI), please contact us.

PTFE BACK-UP RING

TOMBO™ No. 9026

A ring offered in endless, bias cut, and spiral forms that are made by machining PTFE with a lathe. Nichias also has backup rings with filler material.

PTFE BALL VALVE SHEET

TOMBO™ No. 9029

A ball valve seat that is made by machining PTFE and filler-filled PTFE with a lathe.

PFA ROTO MOLDED CONTAINER

TOMBO™ No. 9947

PFA ROTO MOLDED CONTAINER is a bottle made from pure PFA using a rotation molding method. The cap is made of PTFE and can be attached to the likes of a coupler or joint to suit your application and sealed with an O-ring.

EXCELIDE™

TOMBO™ No. 9550

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.

EXCELIDE™ CURTAIN WALL

TOMBO™ No. 9551

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.

NAFLON™ DIAPHRAGM

TOMBO™ No. 9080

It is a diaphragm made by molding and firing PTFE powder.
The manufacturing dimensions are a maximum of ™930 mm.