RF BOARD™

TOMBO™ No. 5461

RF BOARD is a product made by adding inorganic and organic binders to alumina fiber and then molding this into a board form.
As it is made of a fiber-based board, it has little heat storage volume. It can be used to design compact furnaces thanks to its excellent thermal insulation properties and workability.
Nichias has a lineup of various dense boards that are suitable for working temperatures of 1, 400°C to 1, 800°C or parts used in such an environment.
Therefore, it performs really well as a lining material for ultra-high-temperature electric furnaces and various high-temperature furnaces.

ROSLIM BOARD

TOMBO™ No. 4350

ROSLIM BOARD H and GH are high performance heat-insulation materials that have better thermal insulation than still air and top-class workability and handling.
ROSLIM Board GH won the 2015 Energy Conservation Grand Prize

NA MILLBOARD™

TOMBO™ No. 6702

NA MILLBOARD is a sheet made by mixing a slight amount of organic binder material with the main component of inorganic minerals before manufacturing it into a sheet form. It is a product with low thermal conductivity and excellent heat resistance (800°C).

MARINETEX

TOMBO™ No. 8200

MARINETEX is a lagging cloth and tape for thermal insulation applications, made by weaving ultra-fine glass fiber with bulky yarn and subjecting it to repeated special treatment to eliminate the prickling sensation of the glass.
It provides excellent thermal insulation and is flexible and stretchy, making it suitable for bonding and sewing. It can be easily installed even in the most complicated of places.

INSULTEX

TOMBO™ No. 8400/8401/8402/8403

Thick glass cloth, tape and yarn for thermal insulation, made by weaving bulky, treated glass yarn. A special heat treatment is applied to the product, and thus it has high strength and maintains its flexibility even at high temperatures unlike conventional glass cloth.
It is suitable for applications that require a cloth that is thicker than our TOMBO No. 8200 MARINETEX.

ALUMINIZED CLOTH

TOMBO™ No. 8982

It is a product that is made by welding aluminum foil onto MARINETEX Cloth or INSULTEX Cloth or bonding an aluminum metallized film to the cloth.

Silica Textile

TOMBO™ No. 8250

This is a silica cloth developed for severe conditions in high temperature ranges for which glass cloth is not compatible. Due to the high purity of the SiO2 fiber, there is little deterioration in the silica cloth even when used at high temperatures, making it particularly suitable for applications requiring heat resistance, acid resistance, and electrical insulation.

ENETHERMO™ R

TOMBO™ No. 4500-R

It is an attachable thermal insulation material that can be used repeatedly.
Nichias assists in environmental conservation and improvements through energy saving initiatives at buildings and plants.

ENETHERMO™ CR

TOMBO™ No. 4500-CR

An attachable, flexible heat insulation material that can be used repeatedly for things like valves, flanges, heat exchanges, semiconductor manufacturing facilities, and other heat dissipation equipment.

ENETHERMO™ PH

TOMBO™ No. 4500-PH

A detachable jacket heater for pipe heating and heat insulation that can be used in clean rooms.
Nichias will happily handle your requests relating to matters such as heater installation, control panel installation, and secondary wiring.

SUPERTEMP BOARD

TOMBO™ No. 4900

SUPERTEMP BOARD is a lightweight, highly heat-resistant, and highly heat-insulating thermal insulation material with calcium silicate as its main component.
It has excellent machinability and is widely used for industrial equipment applications.
TOMBO No.4900
SUPERTEMP Board

FA ADHESIVE/SPRAY COAT

TOMBO™ No. 9861/9871

The adhesive is used as an adhesive for various linings. There are three types available that are distinguished by the base material: FF adhesive, FC adhesive, and FM adhesive.
The spray coat (surface coating material) was developed as a surface coating material for various linings. By spraying about 1 to 2 mm onto a surface, it offers improved windspeed resistance, scale resistance, dust resistance, and alkali resistance.
*Be aware that the adhesive performance of the coating material may drop according to the usage environment.