ALUMINIZED CLOTH

TOMBO™ No. 8982

It is a product that is made by welding aluminum foil onto MARINETEX Cloth or INSULTEX Cloth or bonding an aluminum metallized film to the cloth.

Silica Textile

TOMBO™ No. 8250

This is a silica cloth developed for severe conditions in high temperature ranges for which glass cloth is not compatible. Due to the high purity of the SiO2 fiber, there is little deterioration in the silica cloth even when used at high temperatures, making it particularly suitable for applications requiring heat resistance, acid resistance, and electrical insulation.

FIRE PROOF CLOTH

TOMBO™ No. 8300

Shipyards and construction sites are constantly exposed to the risk of fires due to spatter and slag produced during welding and cutting. There may also be cases where vital equipment such as computers could be damaged. Our Fire-Proof Cloth is a dedicated spark-protection cloth developed to withstand such severe conditions.

ENETHERMO™ R

TOMBO™ No. 4500-R

It is an attachable thermal insulation material that can be used repeatedly.
Nichias assists in environmental conservation and improvements through energy saving initiatives at buildings and plants.

Pyrogel™ XTE

Pyrogel XTE is a heat insulation Aerogel blanket that is made by impregnating silica Aerogel into glass fiber cloth.
Silica Aerogel is known as a material with the lowest thermal conductivity of any solid. It has features such as excellent thermal insulation properties, water repellency, flexibility, environmental safety, and ease of handling, and can achieve excellent heat insulation performance. Pyrogel XTE is an ideal heat insulation material for retaining heat in high-temperature pipes, equipment, and tanks, and is essential for pursuing the best possible thermal efficiency.

FOAMNERT™ BOARD

TOMBO™ No. 5000-TN

FOAMNERT TN is a rigid urethane foam thermal insulation material made of closed-cell foam. It is a carbon dioxide foam-based cryogenic insulation material that does not contain any chlorofluorocarbon foaming agents such as HCFCs and HFCs.
Molded products include covers and boards. Nichias’ covers are JIS-certified products (certification number GB0309002).
It can be used within the temperature range of -196°C to +100°C. It can be widely used as a thermal insulation material for LNG and LPG bases, ships, petrochemical plants, and district heating and cooling.
Note: +40°C or less is recommended for the internal temperature when using continuously.

FOAMNERT™ COVER

TOMBO™ No. 5001-TN

FOAMNERT TN is a rigid urethane foam thermal insulation material made of closed-cell foam. It is a carbon dioxide foam-based cryogenic insulation material that does not contain any chlorofluorocarbon foaming agents such as HCFCs and HFCs.
Molded products include covers and boards. Nichias’ covers are JIS-certified products (certification number GB0309002).
It can be used within the temperature range of -196°C to +100°C. It can be widely used as a thermal insulation material for LNG and LPG bases, ships, petrochemical plants, and district heating and cooling.
Note: +40°C or less is recommended for the internal temperature when using continuously.

NAFLON™ PTFE BELLOWS

TOMBO™ No. 9061-S/9061-HW/9061-GY/9062-S/9062-L/9063-S, L

Mainly for absorbing the thermal expansion and contraction of piping, it is an all-around expansion joint that uses fluororesin, which boasts many excellent attributes such as chemical resistance and heat resistance.
Please contact us if you have any questions regarding using or choosing a product.

NAFLON™ HOSE

TOMBO™ No. 9065/9066/9067/9068

NAFLON HOSE contains an inner hose made from an excellent heat- and chemical-resistant fluoropolymer. These products can be further modified to meet the requirements of particular applications by reinforcing the outside of the tube with protective stainless steel wire braiding or fitting with designated metal or flared connections. For its main applications, it is best suited as a pipe joint for steam, oil (particularly non-flammable oils), various gases, chemical solutions, and foodstuff.

Fluoropolymer lined valve

The Ball Valve, Diaphragm Valve, and Ball Check Valve have thickly lined walls made of PFA and ETFE. The wetted part of all these products is lined entirely with fluororesin and so they can be used with peace of mind as fully-fledged, corrosion-resistant valves.

PFA lined pipes

A straight pipe fitting that has a thick wall lining made of PFA. The standard product size is 15 A to 300 A, and for straight pipes, Nichias can manufacture a product up to 5 meters. Proud of its vast lineup, Nichias has a whole range of fittings ready and available. Nichias also manufactures non-adhesive, colored PFA lining products for use with high-purity chemical solutions.

Fluoropolymer tank lining

As an application that utilizes the excellent chemical resistance and heat resistance of fluororesin, it is used as a corrosion-resistant lining for large-diameter tanks, stress tanks, and towers. Nichias offers PFA and PTFE fluororesins as types of lining materials, and thanks to Nichias’ various lining methods, the materials have a broad temperature range and chemical resistance, as well as excellent performance in a wide pressure range.