Non-metallic flexible expansion joint
NA BELLOW-Q™
TOMBO™ No. 9999-NA
NA BELLOW-Q is a non-metallic flexible expansion joint that combines inorganic fiber cloth and PTFE and is used for various pipes and smoke airways such as ducts. It absorbs expansion and contraction, deformation, and movement from the heat swelling, vibrations, and pressure of large-diameter ducts and pipes.
PTFE sink
NAFLON™ PTFE SINK
TOMBO™ No. 9500-M/-H
There are two types of NAFLON PTFE SINK: a seamless “one-piece molded square sink (TOMBO No.9500-M)” manufactured by hydraulic forming and a “welded type square sink (TOMBO No.9500-H)” that is made by welding an 8 to 25 mm sheet. Both can be manufactured with optional drainage slopes and drain holes on the bottom. The welded type, in particular, can be manufactured into shapes to suit your application without any need for a mold.
Oil-resistant rubber coat type
METAKOTE
TOMBO™ No. 1600
It is an adhesive material with excellent heat resistance, LLC resistance, and oil resistance.
Metallic shim with rubber coat
METAKOTE
TOMBO™ No. 1600
Nichias’ anti-brake-noise shim material, METAKOTE, is a composite material in which NBR rubber, which has excellent vibration-damping properties, is coated and vulcanized evenly and firmly over both sides (or one side) of a metallic base material using Nichias’ special adhesion technology. It reduces brake noise by way of rubber vibration isolation and sliding friction.
Oil-resistant foamed rubber coat type
METAFOAM
TOMBO™ No. 1608
It is a material that adapts very well to flanges.
Composite metal vibration-proofing gasket
METAFOAM
TOMBO™ No. 1608-V
It is a gasket used for engine intake parts and not only acts as a seal but also insulates against engine vibration.
High-performance sandwich-structured shim
METAPULS
TOMBO™ No. 1614
METAPULS is a completely new type of brake shim that is made by layering rubber and metal plates and performing adhesive lamination of the metal plate via a special heat-resistant adhesive. It significantly reduces squeaking by adding vibration-damping performance not featured in conventional products and placing the rubber surface on the caliper side.
Pasting-type shim with heat-resistant adhesive
METAPULS
TOMBO™ No. 1612
METAPULS is an adhesive brake shim material that is made by coating a metal plate in rubber and highly heat-resistant adhesive material “E”. By peeling off a release paper and affixing it to the braking plate of the brake pad, this product reduces the squeaking sound of brakes with its vibration-damping mechanism.
Exhaust system gasket
EXHAUST MANIFOLD GASKET
TOMBO™ No. 1850E
An engine exhaust system gasket that also demonstrates excellent sealing performance with high-temperature combustion gas.
Spiral wound gasket for exhaust pipes
VORTEX™ GASKET
TOMBO™ No. 1824
It is an exhaust pipe gasket that has excellent heat resistance and adaptability due to the metal hoop and soft paper.
Low friction, self-lubricating sliding material
EXCELIDE™
TOMBO™ No. 9550
It is a sliding material with improved mechanical attributes such as wear resistance and creep resistance achieved by adding various filler materials to high-performance resins (PTFE, PPS) that have excellent heat resistance and low wear resistance properties.
Fluoropolymer machined product
PTFE MACHINED PRODUCT
TOMBO™ No. 9020
It is made of PTFE, which boasts excellent heat resistance and a low friction coefficient, and is cut into shapes to suit all kinds of applications.
