other packing
![](/cms/nichias/img/products/item/seal/packings/5886f4c933d03.jpg)
SQUARE BRAIDED PACKING
TOMBO™ No. 8520-WH
A packing with TOMBO No.8520-H as its base, it is subject to moisture ingress treatment to improve its adaptability and high-temperature sealing performance.
Blanket-form heat-insulation material
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_living02.jpg)
FINEFLEX BIO™ Blanket
TOMBO™ No. 5615
FINEFLEX BIO Blanket and FINEFLEX BIO LT Blanket are products that are made by repeatedly layering silica-magnesia-calcia-based alkaline earth silicate (AES) wool, molding it into a blanket shape, and then subjecting it to needle punching.
Blanket-form heat-insulation material
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_living02.jpg)
FINEFLEX BIO™ LT Blanket
TOMBO™ No. 5615-LT
FINEFLEX BIO Blanket and FINEFLEX BIO LT Blanket are products that are made by repeatedly layering silica-magnesia-calcia-based alkaline earth silicate (AES) wool, molding it into a blanket shape, and then subjecting it to needle punching.
Block-form heat-insulation material
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_high06_01.jpg)
FINE BLOCK™
TOMBO™ No. 5655
FINE BLOCK is a product that is made by molding FINEFLEX BIO Blanket or an alumina fiber blanket into a block form.
Paste-form amorphous fire-resistant material
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_living07.jpg)
FINEFLEX BIO™ CAST
TOMBO™ No. 5675
FINEFLEX BIO CAST is a monolithic refractory material in paste form that is made by wet-mixing FINEFLEX BIO Bulk and inorganic binders, etc. It is a repair material that can be easily installed to unique shapes and complex parts due to being a soft, kneaded material.
TOMBO No.5675-400 A standard general-use product.
TOMBO No.5675-700 A high-density, general-use product.
TOMBO No.5675-400P Suitable for pumping and spraying construction methods.
Molded heat-insulation material
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_living06.jpg)
FINEFLEX BIO™ Mold
TOMBO™ No. 5645
FINEFLEX BIO Mold is a product that adds inorganic and organic binders to FINEFLEX BIO Bulk and is molded into various shapes by way of a suction molding method.
TOMBO No.5645-M is a minimal odor type that has incorporated a very small amount of organic binder. TOMBO No.5645-A is a general-use type that has excellent workability.
Textile product
![](/cms/nichias/img/products/item/insulation/600C_or_less/l_thumbnail_living04.jpg)
FINEFLEX BIO™ Textile
TOMBO™ No. 5685-A/-B/-C/-D/-E
FINEFLEX BIO textile products are cloths, tapes, cords, and ropes manufactured by mixing a small number of organic fibers with silica-magnesia-calcia-based alkali earth silicate (AES) wool and using the same method as general textile products.
Heat-expandable and fire-resistant sheet
![](/cms/nichias/img/products/item/insulation/600C_or_less/l_thumbnail_general02_01.jpg)
VERMOFLEX
TOMBO™ No. 6760-A
VERMOFLEX is a heat-expanding fireproof sheet that is made by mixing a heat-expandable inorganic material and small amounts of organic and inorganic binders with alkali earth silicate (AES) wool, and then manufacturing it into a sheet form. Its thickness expands by about three-fold when heated (when heated without a load).
Board-form heat-insulation material for transfer, casting, and holding
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_aluminum01.jpg)
LUMIBOARD
TOMBO™ No. 4720
LUMIBOARD is an asbestos-free, xonotlite-based calcium silicate board with excellent heat resistance. It has excellent machinability and is best suited as a transfer, casting, and holding type thermal insulation material for headers for troughs, spouts, floats, hot top rings in direct contact with molten aluminum alloys and holding furnaces for die casting.
There are two types of this product: L-14Z, which is the standard version, and L-100, which contains special reinforced fibers. This product is used as a material for casting parts such as hot top rings.
Molded shapes for molten aluminum vessel
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_aluminum02.jpg)
LUMISUL
TOMBO™ No. 4723
LUMISUL is an integrated molded product that is molded and fired into various shapes as a lining material for receptacles that come into direct contact with molten aluminum alloy.
It has excellent dryness, strength, moisture retention, and cutting properties, and as it is heated and fired beforehand, it has excellent heat stability and durability, with almost no moisture harmful to molten aluminum.
Ceramic fiber based fibrous castable
![](/cms/nichias/img/products/item/insulation/1500C_or_less/l_thumbnail_aluminum03.png)
LUMICAST™
TOMBO™ No. 4722
LUMICAST is a fiber-based amorphous thermal insulation material that is designed for lining various water receivers and gutters in direct contact with molten aluminum alloys.
Thin lagging glass cloth
![](/cms/nichias/img/products/item/insulation/600C_or_less/l_thumbnail_heatresistant01.jpg)
MARINETEX
TOMBO™ No. 8200
MARINETEX is a lagging cloth and tape for thermal insulation applications, made by weaving ultra-fine glass fiber with bulky yarn and subjecting it to repeated special treatment to eliminate the prickling sensation of the glass.
It provides excellent thermal insulation and is flexible and stretchy, making it suitable for bonding and sewing. It can be easily installed even in the most complicated of places.