OVAL RING JOINT GASKET

TOMBO™ No. 1850V

The Ring Joint Gasket is a gasket processed into specific shapes by machining cast metal materials. It is used for high-temperature, high-pressure pipe flanges, valves, pressure containers, and heat exchangers.
With its oval shape, the sealed surface forms a linear contact and so it adapts easily to the flange grooves. On the other hand, the ring cannot be reused.

FLAT METALLIC GASKET

TOMBO™ No. 1850P

A flat gasket that is made by flattening metal.
The sealed surface adapts to the flange, and so a high clamping pressure is required.
To improve the sealing properties, nubbins may be machined on the flange.

SERRATED METALLIC GASKET

TOMBO™ No. 1890

Its shape gives it excellent sealing properties compared to flat metal gaskets.
Although it is subject to concentrated surface pressure, the flange surface may get scratched.
It is a gasket used for pipe flanges, valves, pressure containers, and heat exchangers.

METAL O-SEAL

TOMBO™ No. 9200P

A gasket made by molding thin metal piping into the shape of an O-ring, welding it at the ends, and then subjecting the surface to ultra-precision finishing. This gasket provides a very reliable, top-class seal across a wide range of conditions from high temperatures to low temperatures and high pressure to vacuum states.
It is used by fitting it onto the grooves and fully clamping it to enable a high-pressure seal with little clamping force.
If the internal pressure is 7 MPa or more, please use TOMBO No.9200V (model with holes).
In the case of gaseous fluids, vacuumed fluids, and highly volatile fluids, Nichias recommends its PTFE coating or silver plating specifications.
It is used for various applications such as valve bonnets, high-pressure container flanges, equipment joints, pipe flanges, plastic processing machinery, rubber extruders, hydraulic equipment, air pressure equipment, vacuum equipment, nuclear vessels, aircraft engines, rocket engines, and automobile engines.

METAL O-SEAL

TOMBO™ No. 9200V

A gasket made by molding thin metal piping into the shape of an O-ring, welding it at the ends, and then subjecting the surface to ultra-precision finishing. This gasket provides a very reliable, top-class seal across a wide range of conditions from high temperatures to low temperatures and high pressure to vacuum states.
TOMBO No.9200V has two or more small holes on the inside (for internal pressure) of the ring or outside (for outside pressure) and demonstrates top-class sealing even at high pressure due to fluid entering the inside of the ring and causing autofrettage to take place.
In the case of gaseous fluids, vacuumed fluids, and highly volatile fluids, Nichias recommends its PTFE coating or silver plating specifications.
It is used for various applications such as valve bonnets, high-pressure container flanges, equipment joints, pipe flanges, plastic processing machinery, rubber extruders, hydraulic equipment, air pressure equipment, vacuum equipment, nuclear vessels, aircraft engines, rocket engines, and automobile engines.

SUPER MANHOLE GASKET

TOMBO™ No. 1420-ST

It is a gasket in which woven fabric is coated in a rubber compound and sewn together into a manhole shape.

SUPER MANHOLE GASKET

TOMBO™ No. 1420-S

It is a gasket in which a cloth made of alkali earth silicate wool (AES) is coated in a rubber compound and sewn together into a manhole shape.

SUPER MANHOLE GASKET

TOMBO™ No. 1420-TH

It is a gasket in which woven fabric is coated in a rubber compound and sewn together into a manhole shape.

SUPER MANHOLE GASKET

TOMBO™ No. 1400-NA

It is a gasket in which woven fabric is coated in a rubber compound and sewn together into a manhole shape.
This product is suitable for exhaust gas and hot air manholes, handholes, autoclaves, large-diameter flanges, diesel engine exhaust pipes, flue manholes, and boiler combustion openings.

NA MANHOLE GASKET

TOMBO™ No. 1374

A gasket in which a glass fiber cloth is coated in a rubber compound and sewn together into a manhole shape.
This product is suitable for exhaust gas and hot air manholes, handholes, autoclaves, large-diameter flanges, diesel engine exhaust pipes, flue manholes, and boiler combustion openings.

NA TADPOLE GASKET

TOMBO™ No. 1378

TOMBO No.1368 is a gasket that is machined into a ring shape and is suitable for the doors of furnaces, heaters, and dryers, as well as dampers and exhaust gas, hot air, and dust manholes.

NA MANHOLE GASKET

TOMBO™ No. 1374/13781420-ST/-S/-TH/1400-NA9094

An endless gasket in which woven fabric is coated in a rubber compound and sewn together into various manhole shapes. This gasket has insufficient airtightness, so use it only for parts where some slight leakage is permitted.
It is best suited for applications in which the flange diameter is large, there is distortion, or a high clamping surface pressure will not occur.