- This gasket is used with the flanges and apparatuses in a plant.
- Joint sheets
Description Product name TOMBO No. Joint sheet for high-temperature use CLINSIL™ Top No.1120 General purpose joint sheet CLINSIL™ Brown No.1995
- Spiral wound gaskets
Description Product name TOMBO No. Expanded graphite tape filler spiral wound gasket GRASEAL™ Vortex™ gasket No.1804-GR series NA paper filler spiral wound gasket NA Vortex™ gasket No.1804-NA series PTFE tape filler spiral wound gasket NAFLON™ Vortex™ gasket No.9090 series Composite filler spiral wound gasket for high-temperature use Vortex™ gasket ‒GS/-GM/-GH No.1806-GS/-GM/-GH series
- Metal gaskets
Description Product name TOMBO No. Metal solid gasket (plain type) Plain type metal gasket No.1850-P Metal solid gasket (serrated) Serrated type metal gasket No.1890 Metal solid gasket (octagonal) Octagonal ring joint gasket No.1850-C Metal solid gasket (oval) Oval type ring joint gasket No.1850-V Metal jacketed gasket Metal jacketed gasket No.1841/1861
- Graphite-based gasket
Description Product name TOMBO No. Expanded graphite gasket GRASEAL™ gasket No.1200/1210/1215 Corrugated metal gasket bonded with expanded graphite CMGC gasket No.1880-GR
- PTFE sheet gaskets with filler
Description Product name TOMBO No. PTFE sheet gasket with filler CLINSIL™ Clean No.1133
- Kammprofile gaskets
Description Product name TOMBO No. Grooved semimetallic gasket Kammprofile gasket No.1891
- PTFE-based gaskets
Description Product name TOMBO No. PTFE cut gasket NAFLON™ PTFE cut gasket/glass fiber-filled PTFE cut gasket No.9007/9007-G20 Special filler filled PTFE cut gasket (low creep) NAFLON™ special filler filled PTFE cut gasket/special carbon filler filled PTFE cut gasket No.9007-LC/-SC Special filler filled PTFE cut gasket (flexible) NAFLON™ GL gasket/FD gasket No.9007-GL/-FD PTFE enveloped gasket NAFLON™ PTFE cushion gasket No.9010-NA PTFE soft type gasket NICHIAS Soft Seal™ No.9096 Rolled PTFE gasket SGM™ gasket No.9096-SGM
- * SGM is a trademark of W. L. Gore & Associates, Inc.
- This packing is used with various valves in a plant.
- Valve packings
Description Product name TOMBO No. Braided expanded graphite packing for high-temperature use Super Seal Packing No.2280-S/-S-SQ Carbon fiber packing NAFLON™ Carbon Fiber Packing No.9077 Corrosion-resistant PTFE fiber packing NAFLON™ Fiber Packing-T No.9033/9034 Corrosion-resistant rolled PTFE fiber packing NAFLON™ Fiber Packing-G �E�o.9042 Other packing for valves - -
- Packings for rotating equipment
Description Product name TOMBO No. Corrosion-resistant graphite particles containing PTFE yarn G-Flon Packing No.9038 Corrosion-resistant carbon fiber packing NAFLON™ Carbon Fiber Packing - L No.9077-L General-purpose aramid fiber packing Aramid Fiber Packing No.9040 General-purpose carbonized packing Gylon Packing No.9039 Packing for high-temperature use Graphite Fiber Packing No.2940
- Packings for food equipment
Description Product name TOMBO No. Packings for food equipment NAFLON™ Fiber Packing-G No.9042-OX/9042�E�S
Thermal insulation materials
- These thermal insulation materials and Refractory materials are used for the pipes, ducts, and furnaces in a plant.
- Rock wool products
Description Product name TOMBO No. Board-form heat-insulation/sound-absorption material MG Board - Blanket-form heat-insulation/sound-absorption material MG Wired Blanket - Heat-insulation material for pipe made of rock wool MG Mighty Cover™ -
- Bio soluble fiber products
Description Product name TOMBO No. Blanket-form heat-insulation material FINEFLEX™ BIO Blanket No.5615
- Inorganic fiber products for ultrahigh-temperature use
Description Product name TOMBO No. Blanket-form heat-insulation material FINEFLEX™ Blanket No.5120/5220-Z Block-form heat-insulation material FINEFLEX™ Soft Block/FINE BLOCK™ No.5425/No.5440 Textile product FINEFLEX™ Textile No.8450/8451/8453/5103/5103-T Adhesive, coating, and joint filler material Adhesives/Spray Coat/FF Cartridge -
- Alumina fiber products
Description Product name TOMBO No. Alumina fiber-based heat-insulation board RF Board No.5461 Continuous alumina fiber textile product RUBILON™ Cloth No.8350
- This product absorbs the expansion, contraction and displacement of various ducts and pipes caused by heat and vibration.
- Expansion joints
Description Product name TOMBO No. Non-metallic flexible expansion joint NA Bellow-Q™ No.9999-NA
Hoses and Corrosion-resistant linings
- These fluoropolymer tanks and pipes are used in liquid lines that carry strongly acidic and alkaline substances.
Description Product name TOMBO No. Fluoropolymer hose NAFLON™ hose -
- Pipe materials
Description Product name TOMBO No. PAF lined pipes - -
Description Product name TOMBO No. Fluoropolymer lined valve - -
- Tank linings
Description Product name TOMBO No. Fluoropolymer tank lining - -
- Vessel accessories
Description Product name TOMBO No. Vessel accessory - -
- Roto linings
Description Product name TOMBO No. Fluoropolymer roto lining PFA roto lining No.9946 Fluoropolymer roto molded tank NAFLON™ PFA roto molded tank No.9947-T
Description Product name TOMBO No. Fluoropolymer coating NAFLON™ coating No.9035
Hot and cold insulation work
- Hot and cold insulation work in plants
- Hot and cold insulation work
Type of works Hot and cold insulation work Energy-use reduction analysis system
- Electric heater tracing work
Type of works Electric heater tracing work
- Refractory work in plants
- Refractory work
Type of works Furnace lining work Stack lining maintenance work
Acoustic insulation work
- Acoustic insulation work in plants
- Acoustic insulation work
Type of works Acoustic insulation work (power stations and plants, etc.)
Aerogel heat-insulation work
- This method restores the heat-insulating performance of heat-insulating material that has degraded over time in a plant without removing it.
- Aerogel heat-insulation work
Type of works Description Degraded insulation resuscitation method é-AIM™ (eco-Advanced Insulation Method)
Disaster Prevention Works
- Covering the steel frame structures in plants with cold-weather-resistant materials
- Hot and cold insulation work
Type of works Fire and cryogenic protective coverings
* TOMBO is a registered trademark or trademark of NICHIAS Corporation.
* All brand names and product names are trademarks of NICHIAS Corporation.